Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi!I would like to ask if someone else is having or experienced this kind of issue. I have several C9105-AXI-EWC access points and they stopped working all of the sudden at the same time. Light indicator is steady green instead of the usual steady bl...
Hi, can you help me with below. I'm having alerts on my Cisco Wireless Controller : %PLATFORM-1-NOSPACE: bootflash : no space alarm assertdevice#dir bootflash:Directory of bootflash:/381909 -rw- 53477376 Apr 23 2024 09:53:33 +08:00 .USWAP.img273 drwx...
Hi Cisco Community,what is P - periodic downloaded static route means in routing table?I have set two static routes, the other one with higher AD. It should show the route with the default AD of 1 in the routing table but it shows the other one with ...
Hi, both my Nexus 3000 had an unexpected shutdown. When powered up Vlan 1 is suspended and only the management IP is pingable. Do you have any idea what might cause this and how to resolve this? Before the loss of power, everything is working.On the ...
Hi, is it possible to have 2 core switches running with the very same SVIs configured? Im not referring to stacking. I want to take down the old core later on but will gradually transfer the connected devices from old to the new core one at a time.
@Mark Elsen is this right sequence for the upgrade. Given that the images are already in the TFTP server, and the commands below were already set on the EWC, EWC(config)#wireless profile image-download defaultEWC(config-wireless-image-download-profil...
Hi @Mark Elsen , thanks for the response. Sorry if this might be a dumb question, but after setting below commands on the EWC cli, how does it trigger the firmware upgrade on the master(ewc) and slave aps? EWC(config)#wireless profile image-download ...
Hi Mark, yes I am planning the upgrade now. What concerns me the most is the flash storage. This is AP's flash storage status: 545398784 bytes total (344252416 bytes free). I have downloaded the 17.15.5 image, and the C9800-AP-iosxe-wlc.bin is 291MB ...
