hi,we are currently evalating cw 2.5.1 bundle to autodiscover our network. the setp is as followsMGt router (sub ip range 172.31.8.0 - 12.0)||L2 switch ranging from vlan 2-10||Routers (default gw pointing to mgt routers)snmp ro & rw is configured acc...
hi,Currently we are using pix version 6.3(5) 506 model for our email server.Policy rule pretty simple, object-group service Email-ports tcp port-object eq 995 port-object eq 456 port-object eq smtp port-object eq 8188 port-object eq pop3acce...
Hi,Currently my Cisco CSC-SSM is online with TMCM 3.5 using MCP.I was unable to login to my CSC-SSM module MANUALLY (without SSO)through the TMCM3.5 even though I have provided the right credentials. Could anyone advice me how to troubleshoot this ma...
hi,i have encountered the following error when accessing the campus manager acquisition tab. it is a clean copy updated to december updates accordingly and updated to the latest patches 4.0.4 (same goes for the other applications). is there any advic...
hi,Is there any documentation that i can show to management regarding this issue?Basically there are no layar 3 core switches that we can assign in this trunked network, is there any other solutions if they really insist to see the topology views wit...
thanks for your replies. Yes i have specified the range using * for the discovery range. any idea which device should i assign for the seed. on the doc it specify seed device should be a core switch. what if customer does not have any core structure ...
my collegue commented based on the config.. he mention that port smtp is not available simply because it has being used for the outbound traffic. that makes it unable to send emials. however please verify the following config and comment.interface et...
yes this access list permits traffic form the outside to the inside based on the ports that have been configured as below.global (outside) 1 interfacenat (inside) 1 192.168.1.0 255.255.255.0 0 0static (inside,outside) tcp interface smtp LotusDomino s...
hi,Thanks, yeah that solves my problem, my system identity on lms was still using the default "admin" credentials which was not registered in acs. that rest my case... many thanks... your help is appreciated
