Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good morning! I recently downloaded QMA on my machine but I am having issues. QMA has already been setup at the customers site, and we got asked to take it over and support it. I'm not finding much information on this so was seeing if someone had ...
Hello everdyone! Running into a weird one! We setup a new SIP trunk and it's registered and up. When testing, for either inbound or outbound, the call seems to work, but we get no audio. I setup the test extension on my Jabber, and when I place a...
We have a weird issue going on. We configured a VG202 for testing purposes. Configured in CUCM with MGCP, endpoints are registered and everythign. MGCP shows active. When testing the FXO ports, we keep getting fast busy. I've captured some debugs...
Thanks! Unfortunately it didn't work for the ringback We did a packet capture and we found something odd. The audio doesn't get picked up by Jabber. I can hear the audio when talking on my cell or deskphone when testing, but when I talk through...
CUCM. They sent us SIP trunk info with username, password, IP. I set it up in SIP-UA, and configured the trunk on CUCM which is registered and up. I place inbound and outbound which seems to "work" but no audio then it drops. Wondering if either ...
