Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi allAt the moment we are implementing VOIP (Alcatel) in our company. Since I activated globally on the switches ?MLS QOS? Samba Filetransfer is very slow. All other applications are running with same speed as before (Filetransfer from Windows, Ft...
I have a problem with overruns on my Portchannel to a VMWare ESX-Server. Does anybody has an idea from what this can come? I had pauseoutputs on another interface, and since i activated Flowcontrol, its good. I tried this here too, but still sameHard...
I have on some interfaces on my Cisco 6506 (Version 12.2(18)SXF)pause outputs.Does somebody has an idea how to fix this?My Interfaceconfig isinterface GigabitEthernet3/41switchport switchport trunk allowed vlan 2-12,30 switchport mode trunk no ip add...
I get from my monitoring tool wrong informations about th Tengigabit interfaces and Portchannel. Its running on 6506 with WS-X6704-10GE and WS-SUP720-3B. I installed snmpv1 there. Or I have to use a special MIB?Are there other possibilities to...
Hi Since we installed the new network we have on our 6500 Giant Frames on the Trunkports(dot1q)and rapid spanning tree to the access-switches. All Accessswitches are running without problems and errors. Also on the Etherchannel between the 2 6500 i h...
This settings are working fine, but all traffic in 1 queue. I implemented this QOS-Settings now on my testswitch and will play with other queuesets.mls qos map policed-dscp 0 24 to 8mls qos map cos-dscp 0 8 16 24 32 46 48 56mls qos srr-queue output ...
I am still working on the same problem. At the moment I installed on the 3560 the image Version 12.2(35)SE1 with the following QOS-Settings. The interesting thing is that when i do a Filetransfer from Samba with Totalcommander i have the full Speed a...
HiOn the interfaces i configured this options. But for the test i removed the qos settings from the testswitch. I tried this with MLS QOS globally enabled and disabled Here is the Portconfig of the interface where mls is configuredTelephonesysteminte...
I connected over the weekend a server who had overruns to a WS-X6748-SFP with the Copper SFP module. Flowcontrol i switched completly of and configured the interface to 1000 fullIn general i got errors on this server when the backup runs.Today in the...
I just found on the Cisco page a link where its written that the Module WS-X6548-GE-TX is recommended not for Etherchannels. Can this be the reason why i have that much overruns?http://www.cisco.com/warp/public/473/193.html#ASIC
