Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I wonder if I can grab some advice..I work on a small network of around 120 users and 30-odd servers spread across 30 switches (made up of a 5-switch 3750 stack, a 3550 acting as a fibre-optic relay and the rest are 2950s and 2970s).Currently the ent...
LMS251 - I have a few alerts in DFM Alerts and Activities that are stale and I cant seem to clear. I've acknowledged them but they still show as 'Active' since Dec 2005 and Feb 10th 2006.The alerts specifically are:InsufficientFreeMemory, STP Topolo...
Hi,I've got CiscoWorks LMS2.5 (Dec2k5) up and running soundly and our security guys would like us to regularly audit the network traffic (sniff and review packets).Is it possible to setup Ciscoworks to regularly run packet captures on devices?Our net...
Is it possible to get CiscoWorks (LMS2.5) to ignore/discard certain alerts say between 8pm and 7am.For security reasons the majority of our network is 'cut off' each night but obvisouly CiscoWorks sees this as a problem and reports Active then Cleare...
I have a stack of four 3750s and am trying to add in an additional one - we've connected the switch into the stackwise 'loop' but when the switch boots up, it seems to get stuck during POST - stopping with the Sys and RPS LEDs lit.There is no respons...
I'm very new to using LMS and 2.5 is my first real dip into managed networking.Personally the most frustrating thing I find is that non of the apps in CW talk to each other. My example is as follows:Each night one of our core switches is powered down...
Thanks - yes I do already have a SPAN port setup - which is how we use the Packet Capture feature. I was hoping there might be a way of regularly running a capture.... If not i'll just end up writing a tcpdump script in php.Thanks again.
Thanks for your help Amit;I disconnected the power from the new switch, connected a console cable up to the existing stack switch and the reconnected the power for the new switch - It turns out the new switch has an incompatible IOS version, so I wil...
