Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm needing some engineering/ design help with ATM. What I need to know is on an atm circuit with say 4 pvc's to four remote locations.these pvc's are provisioned as UBR pvc's. Can I run up to the full bandwidth on any of the pvc's? or is the ATM t1 ...
does anyone have an example of a 2 vlan config with inter-vlan routing?I have ports 1-10 on vlan 1ports 11-27 on vlan 2if I set all the ports to trunk mode I can ping from the switch to a box on vlan 2. but set in access mode i can not.I cannot ping ...
I am turning up a new wan on the ATM protocol. And with my current setup I can not ping the ATM interface on the router. Can anyone tell me what I am missing? HELPGenenetwork-clock-participate aim 0network-clock-select 1 T1 0/0/0network-clock-select...
Hello I am hoping someone can help me with this.On a site to site VPN with 2 Pix firewalls. I need to be able to use wins resulution for printers and such. remote network is connecting across the IPSec tunnel to a terminal server. In normal situation...
Is there a way to restrict or log a remote access client to a matching pair of mac address and user/password login?I want to be able to track all the remote access vpn clients using both the mac and the username/ password used. I also need to track w...
Currently IP routing is enabled.ports 1-10 are on vlan 1, the default vlan. with ip address 1.x.x.20/24 ports 11-27 are on vlan 2 ip address 2.x.x.20/24 if ports 1-10 and 11-27 on their repective vlans are set to access mode I cannot ping the pc on v...
Is the a wic-1dsu-t1 interface? if so you will specify the linecode, frameing, and timeslots, clocking should be from the line or external, and encapsulation on the main interface. on the subinterface specify the dlci and the ip addressing. Or doit a...
read up on your wild card masks these are the inverse of the subnetmasks so the 0.0.0.2is the access-list equivalant of 255.255.255.254 or 2 ip addresses so this access list permits 192.168.100.0 and 192.168.100.1 all other ip addresses would be deny...
If I read this right, Pings from the wan to the printer work? but pings to and from the lan PC do not unless you first ping or traceroute to the printer from the wan?A show run posted here may help. Check the simple things first. Access lists on the...
