As a service providers we using Cisco 3750ME and 3750 Series to provide Layer 2 and Layer 3 network access with different rate from 6Mb to 100Mb bandwidth for their different needs.Customers who need 100Mb or less will connect to 100Mb, Full Duplex E...
I wish that Cisco would collect as many as network scenarios and pratical configurations for 3750ME, Metro Ethernet, and MPLS, starting with few basic one.Cut down the marketing materials. It will benefits all customers and cut down supports.
We do have a central 3750ME and 6209 Router. All the 9 remotes sites with different ethernt bandwidth homerun to central location for internal communication (Transparent LAN) and access to Internet.Central site will provide all services.Need your hel...
We do have fibers everywhere in the city in hub and spoke fashion. All the fiber home run to our data center which has high speed Internet access via Level3 and Qwest.Since we have a chance to build our network from beginning and provide ethernet ser...
Raj;I downloaded Cisco 3750ME Swtich Software Configuration and Command Reference with a latest revision. After a long research, the closet I found on page 32-89: Limiting the Egress Bandwidth on Queue Set.I don't find a simple Port Rating Limiting. ...
Excellent...Rate-Limit is what I am looking for but could not find any useful information on Cisco 3750ME and 3750 Series switches. Can we ask genius at Cisco to implement a simple "rate-limit" command? It will simplify network configuration and im...
Raj;Your policy input is very helpful and practical solution. Our engineers currently implement your recommendation. I'm looking for an approach to accomplish a simple task with bandwidth limit. Is there a better way?If customer connects to fa1/0/1 1...
In order to avoid confusion, I called VMAN. The concept and benefits are the same as native 802.1q in LAN environment but apply effectively for WAN and providers.VMAN is for Provider and it is transparent to customers.Make sure the provider switch se...
2950 Switch connects to 3750ME fa, Port 1, 100Mb3560 switch connects to 3750ME gi, Port 1, 1 GbEIs there a way we can simply limit bandwidth and rate at port level on Cisco 3750 access switch to match bandwidth needs from edge switches?Thanks
