Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We currently use Polycomm video conference systems with dual screens and have recently purchased Cisco SX80 systems (also dual screen). The issue we are experiencing is that when connected to a BlueJeans hosted video conference, content sharing does ...
Hello Cisco Community,
I have a 2504 WLC and two 2800 series APs directly connected to POE ports (3&4) of the controller.
Both APs have an IP address which they acquired from our internal DHCP server.
These IP addresses are reachable on the controll...
Hi guys, Can anyone help me why i can't access the servers that is on the corporate network that is located on the trust side of the ssg140 firewall using anyconnect vpn.my network topology goes like these: dmz untrust ...
Hi Sandeep,
Thanks for your comment.
Cisco has release 8.2.151 o extend the support of TKIP to 1800/2800/3800 series APs right?
This is why we chose this code. And we have around four (4) sites that are running TKIP on 2800 series.
Yes, both radios ...
Hi,
Does code 03.06.03 actually resolved the cosmetic bug "No Response" once I upgrade my stacked 3850 switches that are currently have a 03.02.02SE version?
Thanks.
Hi Rizwan,Thanks for the reply.I did what you have suggested, and it works like magic.May I ask the reason for removing the static nat:static (inside,inside) 172.30.20.0 172.30.10.0 netmask 255.255.255.0Thank you very much and kind regards.-L.A.-
Hi Julio,Thanks for the reply.I already add the management-access inside. What should i ping?here is the result of the packet tracer commandciscoasa(config)# packet-tracer input inside tcp 172.30.20.62 1025 172.30.10.1$Phase: 1Type: FLOW-LOOKUPSubtyp...
