Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi thereI am using HWIC-1GE-SFP on 2811 ISR. the Gig port seems up but cannot ping the other end and does not send any traffic. any help is appreciated.
Hi thereI am using HWIC-1GE-SFP on 2811 ISR. the Gig port seems up but cannot ping the other end and does not send any traffic. any help is appreciated.
HiI would like to have the corporate directory on the ip phones to be fetched from the Microsoft AD but would not like to use the Customer directory integration plug in. I have heard that it can be done using the xml scripts. does any one have that ...
Hi there I have this issue when my client changes their office. My client has 2 office one in dubai and other in paris. there is a VPN connection between the sites. in dubai they have CCME and in Paris they have CCM cluster. we changed the extension ...
Hithe /30 link is t the ISP. there is n access lists. Also the cable is connected to the media converter. I do not see any link on the media converter. however if I connect any other device on the Meda converter, its working perfectly OK.is there any...
thanks for your reply...i tred to do that it does not work. i did change the GLC-T SFP but no luck. and yes the HWIC 1GE-SFP does support GLC-T. i did verify this with the cisco document.
Hi the module is recognised. it is up when i see in the sh ip int bri.other side is the fiber to copper media converter. GLC-T copper SFP module is connected to the HWIC.sh run interface GigabitEthernet0/3/0 ip address XX.XX.XX.XX 255.255.255.252 no ...
ok let me make it more clearAt Dubai officeExtension 1320(Mr X), 1321(Mr. Y)At Paris office Exten. 1320(Mr. A), 1321(Mr. B), 1322(Mr.C)Eg 1 (for problem no 1)when X calls B, he will get connected to B but the display on his phone(of mr X) will show h...
Hithanks for the help. but i have already done u said. the problem is not routing the calls. problem is the connected party number presentation on the calling party phone. as long as the connected party number is overlapping, the local device(in my c...
