Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone, I'm new at Meraki so I'm curios about Meraki SDKs, I know there is 2 one Python based and the other Node.js based but for Python I encountered two the "meraki_sdk" and "meraki" which one of them I should be use?, both are updated? or so...
Hi there,I'm having a problem with a HUB-AND-SPOKE TOPOLOGY, my HUB is site 1, and my SPOKEs are: site 3 and site 4. The problem is that when I apply the centralized policy my spokes doesn't installed any route. Here is the topology:The config of my ...
Hi There, I can't bring up a MPLS TE tunnel with fast-reroute Node Protection, here is the error I get.*Dec 18 21:24:32.537: %MPLS_TE-5-LSP: LSP 2.2.2.2 5_192: DOWN: path errorI attach the headend's configinterface Tunnel5ip unnumbered Loopback0tunne...
hi there, the problem is with the records, if you change it to the originals you will validate what I'm saying ("record netflow ipv4 original-input"), try to change every match and collect comand to basics, I mean doesn't no include dynamic fields, l...
hi there, the problem is with the records, if you change it to the originals you will validate what I'm saying ("record netflow ipv4 original-input"), try to change every match and collect comand to basics, I mean doesn't no include dynamic fields, l...
I was reading the Oficial Certificate Guide of DevAsc 200-901 and Cisco uses "meraki_sdk", do you know if that library it is deprecadated?, or in the exam both libraries will be included?
yeah that was the problem, I forget about the default route on the vSmart, thank you guys for your help,BTW, I also recommend to others that routes will no be shared between sites if they have the same site-id, it also happens to meThank you!!!
