Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We are running LMS 3.2 (CM 5.2.1) and UTU 2.0 and we experience a problem - UTU sometimes gives valid response, sometimes writes "Check whether you have configured the correct server name and port number". The configuration (server name, port a...
Hellowe have ASA 5520 running 8.2(3) software and we're trying to make Remote Access VPN (l2tp/ipsec) working from Android. We succeeded in making IPSEC tunnel (ending "Phase 2 completed"), but we cannot make L2TP tunnel working.We're using RADIUS f...
Hello,we've LAN to LAN IPSEC tunnel between Vigor 2700 (spoke) and ASA 5520 (hub, ASDM configured). On the hub side we need to protect local LANS 172.27.0.0/16, 172.30.0.0/16, 172.31.0.0/16 and 192.168.0.0/16, on the spoke side we have 172.27.241.96/...
Hello,We've provided "remote upgrade" from LMS 3.1 (Win 2003) to 3.2 (Win 2008 64bit). The restoration of backup directory ended by messageERROR: doRestore of [Resource Manager Essentials] had some errors.I've checked all three log files mentioned in...
Hello,Situation: We've approx. 15 L3 switches running VRF Lite (3550-12G. 3750, 3560E, 6506), CDP enabled, Management addresses Loopback0 in global routing table. We've all devices are in Device Repository in LMS, all pass the Credential Test, but th...
Hello,I'm attaching- packet capture of the TCP stream - the pattern is in frame 1, 9, 20, ...- screen shot showing the XML request and reply- ut.log only, so we are using- we aren't using utlite
Hello,although Android doesn't belong to the group of supported L2TP/IPSEC VPN clients, I made it working - I followed instructions mentioned in this URL: https://supportforums.cisco.com/thread/2012285Key factor (at least in my case) was upgrade to 8...
Hi, Mikethanks for idea. After a weeek of testing, I came to fact, that Vigor 2700 is probably able to hold only one IPSEC SA between two hosts - when IPSEC SA between 172.27.241.96/27 (spoke) and 172.27.0.0/16 (hub) was established and we needed to ...
Hello,here you are. Sorry for delay - i had to be almost a week off."Migratition.zip" contains three log files mentioned above, "window.log" is output of the restore command on the screen.Thanks in advanceJan Klicka, SITMP
