Hi Alex, could you check this  link https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/label-switching/b-cisco-nexus-9000-series-nx-os-label-switching-configuration-guide-93x/b-cisco-nexus-9000-series-nx-os-label-switching-con...

Hello Reeceb, Please configure source interface in 2960X and try. Example ip ssh source-interface gigabitethernet X/Y      

Hello Hakim17, access list is missing , please add access-list 1 permit 192.168.10.0 0.0.0.255, this will ping 8.8.8.8 from R1 with source 192.168.10.1 Why there is same IP address in R1 - GigabitEthernet0/0 172.27.47.25 255.255.255.248ASA FW - Gigab...

 You can configure "switchport mode access" or "switchport mode trunk" in an interface of ISR1000. Please Check the below link, https://www.cisco.com/c/en/us/td/docs/routers/access/isr1100/software/configuration/xe-17/isr1100-sw-config-xe-17/configur...