About rage

rage · 06-09-2006

Greetings.Suddenly a few days ago, my ADSL stopped talking to the world. I can ping within my local network, and I can even ping the Dialer1 address... butwhen I telnet to the router itself (1751V 12.3) it just doesn't respond at all when I try to pi...

rage · 10-26-2005

Ok, so I have my 1751V setupand it appears to be running fine. The Fast 0/0 is set to 10.10.10.1 and I have a VLAN2 setup so that all 4 ports on the WIC-4ESW are 10.10.12.X.The Router can ping anything out anywhere on any port, but there seems to be ...

rage · 10-13-2005

Ok, I have a 1700 Switch with the FastEthernet 0/0 set as 10.10.10.1If I create various VLANs, they give me the "hey buddy, it overlaps with Fastethernet 0/0" error if they are in the same10.10.10.X range.Naturally, I could define each of the VLANs a...

rage · 09-23-2005

Installed a new WIC-1ADSL in my 1751V yesterday. It sees the card fine, but I cannot get the IF to talk to the line. SO, I do a debug and get the following:01:44:29: DSL: No response on write to 0x001:44:29: DSL(ATM0): Could not download ASW_init_3_8...

rage · 02-09-2007

I believe this may be the answer. I haveseen the identical issue on two separate12.3 routers of the 1751V type.Same errors exactly.Different local PCs running at the time, so I don't think it's related to anything internal. Different memory in the a...

rage · 06-09-2006

Perhaps not clear enough.If I telnet onto the router itself, I can ping anything through the FastE ports, but Dialer1 andATM1/0 doesn't answer.

rage · 10-26-2005

I have checked the default gateways.I can ping extended IPs on VLAN2 from mybuilt in FastEthernet0/0 at 10.10.10.XI can see both subnets (10.10.10.0 and 10.10.12.0) from a sh ip route command....yes.

rage · 10-17-2005

Any further input on thisthisisshanky?Still don't seem to be able to configure inyour suggested way after monkeying with itall weekend.

rage · 10-14-2005

Sounds like this would be a resolution to my problem alright...However, when I attempt to do your suggestionof int fa0/1ip add 10.10.20.1 255.255.255.0it responds%IP addresses may not be configured on L2 links.But I have indeed entered the "no switch...

Member Since	‎09-23-2005 11:40 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	15

User Statistics

User Activity

ADSL STOPPED WORKING?

VLAN Routing.

VLAN Overlapping - Don't Get it

WIC-1ADSL Won't No Shut in 1751V

Re: low on mem? i think?

Re: ADSL STOPPED WORKING?

Re: VLAN Routing.

Re: VLAN Overlapping - Don't Get it

Re: VLAN Overlapping - Don't Get it