Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Need configuration assistance.I had configured Active Directory user database in ACS SE 1113 running 4.1(1).Just as UCP for ACS, allow user to change password for internal database of ACS, i want let user change password directly in Active Directo...
Hi,We have deployed ACS 1113 with 4.1 version recently in our network.I had configured downloadable access list in ACS for remote VPN users.But when user connects to and authenticate to ACS then the user is not able to browse internet from his PC.Ear...
Hi,We hv one STM-1 link provided by service provider.This has been configuredin channelised E1 links. I got two optic pair from service provider.Further two optic links has been provided by same service provider from the same MUX as redundant link to...
Hi,Whenever any remote client connects to our central office PIX throgh cisco vpn client then after connecting to VPN that remote client is not able to access internet from his workstation.And when he disconnects the VPN then he is able to access int...
Hi,I'm able to register Avaya as SIP devie in CUCM. Calls are going.But FOC is not working with these devices, any advice for this, please share.Thanks!Kam
Hi,1) 6.3 is running in PIX.2) If i use spilt tunnel, then DACL does'nt work. Remote gets access which is allowed in access list of spilt tunnel.If won't got your point then please get reply with little bit more detail..Thanks!KAmal
Hello Gilbert,I configured the new interface with same security level of 100 as inside interface.Everything works fine except the VPN tunnels.And after wards reverted back to pervious configuration and found the VPN tunnels working fine.My point of c...
