Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All Have a teleworker with a SPA525G2 that is connected wirelessly with SSL-VPN that is experiencing choppy voice calls. The phone has 2 or 3 bars of signal out of 4 when the choppy voice is experienced. We determined that the computers are conn...
Curious if anyone has the above working and might be able to provide some pointers? Inbound/Outbound calling is fine, and we can call-fwd to internal extensions.When call forwarding to an external number, or setting up SNR the calls just fail (fast ...
Hope there's a simple answer to this one! On a 7970 phone, if two calls come in on the same line button, how is it possible to conference the two calls together? If you're already on a call, it's easy to hit 'CONF' then dial the new number and bridg...
Anyone have a working CLI example of blocking an inbound FXO call based on Caller-ID? The UC540 was configured with the default CCA config and unfortunately not having much luck getting Call Reject to work from the command line.Thanks!
Thanks so much for your helpful information.Yes WMM is enabled and firmware is at 7.5.3. Also tried a different AP. Was unaware of the DTLS option but have since enabled it. There were no improvements in quality with the above, but after purchasi...
Thanks for a step in the right direction after reviewing our config...We were able to resolve issues with Jabber by removing the codec from the voice register pool and then making sure the following was set: voice class codec 1 codec preference 1 g71...
I don't have those commands in our config. We are able to receive calls (from external via SIP trunk), but any outbound calls from Jabber result in a fast busy.
Can you provide more details on what options you had to change to fix this? I've been experiencing the same issue, No outbound SIP trunk calls from Jabber (just fast busy).Thanks!
