Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Abdallah,You'll need 'data' license to use this feature.You can try to evaluate this license to test your configuration (if not evaluated before):http://www.cisco.com/en/US/docs/routers/access/sw_activation/SA_on_ISR.html#wp1155619Sergey
For example you have Fa0/0 facing your mpls router, then you have 3 sub-interfaces:pseudowire-class pwc_l2tp encapsulation l2tpv3 ip local interface Loopback0int Fa0/0 no ip address mtu ...int Fa0/0.10 encapsulation dot1q 10 xconect [remote_ip_10] 10...
Hi Ty Chan,What type of Ethernet / WAN cards you're using on R1 and R2 facing to each other?Could this be a hardware limitation?For VPLS you have to use ES/ES+ or SIP- cards.Sergey
