Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Have a need for remote support application to use port 80 traffic instead of 443 as some remote support users have port 443 blocked. Traffic is not http, so this needs allowed. Seems like default for ASA 7.2(4) is to block non-standard http. Not much...
Have a need for remote support application to use port 80 traffic instead of 443 as some remote support users have port 443 blocked. Traffic is not http, so this needs allowed. Seems like default for ASA 7.2(4) is to block non-standard http. Not much...
Customer has four AP1242 autonomous access points running 12.3(11)JA4, downgraded from 12.4.10b JA and the 7921 phones will periodically re-register with the CCM 4.3 server. One phone will not get a DHCP address but will work if we statically address...
Is there a minimum version that will work with UCM 6.0? Currently running 4.5 with UCM 5.1 and wanting to upgrade that to V6.I haven't found any declaration stating a version requirement such as 5.X or the new UCCX V6.Thanks,Dave
Did you get this resolved? I'm having the same problem with a new installation, four autonomous 1242AG access points with 7921 phones. They drop their registration from CCM and one of the phones won't get an IP address, but works intermittently with ...
I did see that one. It does seem like it's something with the phone firmware. We've had issues with 1.03 that 1.04 fixed. I've done installations like this many times with 7920 phones and the configuration is solid, but it seems the 7921's are starti...
Once Cisco/HP servers lost PCI slots, it created an issue with using the Soundblaster sound cards. We switched to USB sound devices which worked fine in CCM4.X. Now that Cisco has released their "own" sound device, that's the thing to use.Here's a li...
I have not tried it myself, but I'm told that the product is VMWARE "aware" and does work for a lab/demo installation. It is not supported however by TAC. The development package bundles a VMWARE image for developers use. Make sure you are configurin...
