About fazlayrabby

fazlayrabby · 08-11-2011

Dear All,I am trying to connect CUCM v7.1 to a provider who is using H323.Outgoing from CUCM is working okIncoming not working (DID extension rings, connects, but no audio and get disconnects after 10 seconds, main number connects but no voice greeti...

fazlayrabby · 08-10-2011

Hello All,We have CUCM V7.1 (in a IBM box) running with two 2811 [(C2800NM-SPSERVICESK9-M), Version 15.0(1)M4, RELEASE SOFTWARE (fc1)] as a voice gateway, each has 2 E1 with required PVDM for PSTN E1 PRI connection. We now want to get a SIP trunk fro...

fazlayrabby · 08-08-2011

Hi all,I am trying to configure a CUBE using 2811 router as below:CUCM........<h323>.....CUBE......<sip>......IPTSPWhen making outgoing call from IPphone I can hear the other party, but voice from inside is not going through.Detail:IPTSP prefered cod...

fazlayrabby · 04-25-2012

Hi MauroIn CUCM administration, under TRUNK configuration if "Media Termination Point Required" is checked that means MTP is on. Hope it would help you. Thanks.

fazlayrabby · 08-28-2011

Dear All,The transfer problem has been solved after checking MTP on. In the begining making MTP on creates lot of problem, but now at the end it solved the problem. Thanks all for your support.Fazlay

fazlayrabby · 08-24-2011

Dear Udit,I have added The command no update caller-id, still same issue.I am not sure if Call transfer require Conference bridge and MTP, should I check those?Thanks for your help.Fazlay

fazlayrabby · 08-22-2011

Dear Udit,That command is already in the configuration. No luck Some more improvement. I asked the Service Provider to send calls to me using SIP. Following is the result:1. Outgoing: CUCM--------IPIPGW---------SP : Works OK2. Incoming: SP------IPIPG...

fazlayrabby · 08-21-2011

Hello Udit and Carlo,There is some improvement. The service provider manage to enable G711 for us. I have donw the following:Change the codec preference to:1. G711ulaw2. G711alawChange the region settings to G711 in CUCM for this GWNow: Outgoing work...

Member Since	‎08-07-2011 01:17 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	20

User Statistics

User Activity

H323 - H323 voice gateway,Incoming disconnects in 10 second, no audio

IOS requirement for H323-SIP voice gateway

2811 Cube [h323-sip] one way voice

H323 - H323 voice gateway,Incoming disconnects in 10 second, no

Re: H323 - H323 voice gateway,Incoming disconnects in 10 second,

Re: H323 - H323 voice gateway,Incoming disconnects in 10 second,

Re: H323 - H323 voice gateway,Incoming disconnects in 10 second,

Re: H323 - H323 voice gateway,Incoming disconnects in 10 second,