Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I work in what I would consider to be a small/mid sized data center. We use two 6513 as the core/distribution for ~25 racks of servers.My question comes in the way of cabling the servers to the core. Currently they are using long patch cords betwee...
I'm working for a new company and I'm running into a bit of an unknown for me.They have two 6513 that have been up and running for over a year. The previous network admin is no longer around and I'm a bit confused on some of the configurations on th...
The basic command is:
Show process cpu
To see the history for the cpu you can use:
show process cpu history
If you want a link try - http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/63992-6k-high-cpu.html
Andy
Dave,Thanks for the reply.Since I can not find Traffic Director or RTM (currently we are running Ciscoworks LMS 2.5) I'm thinking I should remove these lines? Whats do you think?Andy
Starting with version 2.5 Cisco Works LMS uses a common database for all devices.There are several methods of entering devices1) Manually add them2) Use auto discovery (remember to set a seed device - oh an this works best if you have CDP enabled)#1)...
VTP is a Layer 2 messaging protocol that maintains VLAN configuration consistency by managing the addition, deletion, and renaming of VLANs on a network-wide basis. VTP minimizes misconfigurations and configuration inconsistencies that can result in ...
TheCisco 1900 series switches only support a menu driven interface.Here is a link to the manual.http://www.cisco.com/en/US/products/hw/switches/ps574/products_installation_and_configuration_guide_chapter09186a008007ec0f.htmlAndy
