Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all,Probably a wrong understanding or something stupid, but I can' find a decent answer.On a lot of our C2950, C3560 and C3750I find following strange thing when doing a show interface x/x:The last input is NEVER, although I see many packets in,...
Following problem is occuring to a couple of our css running version 07.40.1.04.The system is running in redundant configuration active - standby isc interconnected.The css are configured to handle mutiple url to be loadbalanced to a farm of 8 server...
I'm coping with following problem.We have about 8 css running in couples of 2 with one active and a second as standby using an ISC.Active and backup css are separated in 2 computerrooms, css1 is connected to a backbone switch in room 1 which is conne...
dear,Is there a way while using leap & mobile ip technology to make it happen when a users becomes associated to an ap (proxy mobile) he always obtains an ip adres from a predefined pool or just one personal ip-adress which we define on our tacacs+/r...
Hello,We've about 9 css of diferent types: 11050, 11501 & 11503. They're all connected with the management interface to a so called management vlan with our hp openview in it 10.0.0.x. Some of our css are connected to our DMZ (hosting a website), and...
Sorry for the late reply, I was on holiday last week:The servers behind our css are using the internet dns, and they don't seem to have any problem with that.But our firewall and ids's aren't happy with this behaviour, and their logs are running full...
Thanks Joerg,I think this might do, but my css doesn't seem to accept this command. Probably I have to upgrad web-ns to a more recent version. Any idea from which version on this will work keeping in mind the http-keepalive with asp pages still has t...
We did have those settings in our configuration but it still failed to work. We've found another parameter which seems to have solved the problem.-> radius-server deadtime xThere seems to be a major difference between -> radius-server timeout x and r...
Hey Jimmy, GeorgI just got a similar project over here.We've got one router connected at 64K serial line.A second router needs to be installed in HSRP config, and when the primary 64k goes down this second router needs to dial out via ISDN.Would appr...
I've upgrade the ios to 12.2(4)JA 1 but not better, same result.I'm not able to find the 12.2(8)JA ios version,if you could tell me where I can find it, I can test it out.
