Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've got a pair of hosted Cisco ASA 5525's in an HA pair that are being replaced. It's a bit of a weird situation because the hosting company owns the devices but they don't manage the devices. Because they don't manage the devices, they won't perf...
I'm doing some spanning-tree training and I'm wondering if it's possible, in the packet tracer software, to set the MAC address of a 3650 switch. I don't want to just set 1 interface, because I want to control (not via priority but via MAC address) ...
Hello Experts!I'm setting up a new vpn tunnel to a partner. ASA on our side Palo Alto on theirs. When the tunnel connects, it seems to run fine. However, should the tunnel go down, it will not come back up unless they initiate the traffic. They c...
I would like to setup sort of a single source of truth for time on the network. Our WatchGuard box at HQ already has pool.ntp configured on it and our servers are then getting NTP data from the WatchGuard. I'd like to also have the ASA 5525, who is...
I've got a couple of MS250 switches which are physically stacked that act as my core. Running off this core is my VMWare environment and SAN. In order for everything to stay happy, my VMware environment needs to be in constant communication with my...
Appreciate the attempted assist but I get a [FAILED] error when I try that.ASA-Primary# failover exec standby write eraseErase configuration in flash memory? [confirm][FAILED]
Which would be a reasonable approach, but I actually only have access to 1 of the devices now. Just sort of a single patch into the primary device. Hosting company would probably charge me to move the cable to the secondary device too. So stupid t...
I agree. Essentially I'm blind now if there is an actual problem. Boss said that he's open to the idea of a GPO to turn off IPv6 but it's a "we'll get to it when we get to it" priority which means likely never.
Actually, Meraki support came back to me with a reason. This is due to IPV6 multicast traffic that get dropped by the switch ports from different VLANSs which is incrementing the interface outdiscard number , that is being reported over the SNMP. W...
