Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Planning to upgrade/replace ASA5525X with Firepower1120 Series loaded with ASA image. Need proper guidance on1. How to perform this move.2. Things to keep in mind.3. Can I simply load existing config on FPR1120 and turn it on. Will everything work ju...
Weird issue where FPR1120 with ASA9.18.3.46 (latest) installed where management interface shows down line protocol up. Cannot connect to management interface. Confreg on device is already set to 0x10
Hello,We have a weird issue here with a 3650 switch. We have it configured to give out dhcp addresses below are the details:- Network:- 10.106.148.0 255.255.254.0 (/23)default router: -10.106.148.2Vlan 148:- ip:- 10.106.148.2 255.255.254.0The issue i...
Hello Friends. We have a situation.Current Setup:- VMware-->Cisco 3750-->>NetApp iscsi. Jumbo frames enabled mtu 9000 bytes. VMWare Storage Resides on NetApp Via ISCSI using switch 3750.We would like to replace the cisco 3750 with Catalyst 3650. Ex...
Symptom: TFTP error occurs when we copy running-configuration (or any file in the flash) of C9300-48P to a TFTP server. The configuration file is created on the TFTP server but no actual content in the file (file size=0). The switch display a timed o...
So apparently, after adding these things to ASA and Core it looks like the whole subnet can now go out to internet now. I'll keep monitoring it. 1 or the other thing have worked, I'm thinking the route worked. Added to ASA: static route 10.106.148.0 ...
