cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4062
Views
5
Helpful
66
Replies

DHCP issue On Cisco 3650

Hello,

We have a weird issue here with a 3650 switch. We have it configured to give out dhcp addresses below are the details:- 

Network:- 10.106.148.0 255.255.254.0 (/23)

default router: -10.106.148.2

Vlan 148:- ip:- 10.106.148.2 255.255.254.0

The issue is :- client who gets address assigned in the range of 148, works perfectly fine and can browse internet, but the clients who get's address assigned in the range of 10.106.149.0 cannot browse internet. Can you help?. 

66 Replies 66

can you access your network NOW ?
if yes for any host in .149 subnet trace 8.8.8.8 and trace google.com

It gets to the core switch  10.106.148.2

the times out

Now same trace 8.8.8.8 and trace Google. Com 

But from host in. 148 subnet 

 

 

 

it completes google at 15th hop before 15, times out

amazon at 14th hop. and varies, before 14th times out

I Know it complete 

What is the first three hops? 

nothing...just

* * * * time out

* * * * Time out

* * * * Time out

completes at 14-15 the hop

Can I see it please 

here

This for each subnet .148 or  .149?

so 140 completes at 15th hop. This was for 149... 

1st few are same on both

so 148 completes at 15th hop. This was for 149... 

1st few are same on both

148 completes at 15th hop.? I cannot understand that? What you meaning 

Do trace to 10.0.76.2

Both .148 and .149 must tracer or ping the this IP'

Please share is as photo.

MHM

the issue is still the same, even if I manually assign 10.106.149.100 255.255.254.0 10.106.148.2 to my laptop, it cannot get to internet

You should give it a try a remove the ACL

interface Vlan76

no  access-group 176 in

Review Cisco Networking for a $25 gift card