Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I work in a DSL team, and This issue is ISP related. Or at least with the DSL line itself.As you can notice, the Noise Margin during the outage gets too low:Noise Margin: -2.5 dB 31.0 dBWhile during normal operation i...
Hello, What you need to implement is Reliable Static Routing Backup Using Object Tracking:http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hdia_c/part30/hdbackup.htmConfig Example:conf trtr 1 type echo protocol ipIcmpEcho 172.16....
Hi Charlie,Can u post the configuration of your router? It seems to be a routing issue since the SDM tool usually dismiss the routing to the dialer interface; if you have the chance, go to the command line and configure the following:Router(config)#i...
Hi,In order to guide you toward a solution, I will provide you with some basic steps that will help you access your router.To recover your password, complete these steps: 1.Attach a terminal or PC with terminal emulation to the console port of the ro...
%BCM-4-ECC_L2CACHE: Corrected ECC from L2 cacheThis message indicates a soft-parity error from the Layer 2 cache has been detected andcorrected.Normal system operation should continue. These errors occur when an energylevel within the chip (for examp...
