Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Any updates on this ? We are faced with this after patching our ise cube with 8 nodes to patch 10 and then DUO MFA ios showing this error now When is the workaround expected ? In the worst case can we rollback one of the psns used as primary for vpn ...
I want to deploy CMS 1000 on my environment and i have the downloaded ova file. can i install it on my enterprise virtual environment and configure with out buying the physical machine ? or can i install the ova file in one of my hp/Cisco physical ...
We have Cisco video conference bridge on TCS, Expressway C &E, the exp-c is connected with the call conductor and Call manager. when a call comes from internet (eg. Cisco spark) on the bridge, it creates a session but drops out immediately. however, ...
I am running a frame relay connection back-to-back on a IGX between two ports on the same UFMU card. The CIR is 512 kbps and the PIR is 1280 kbps, I have Cisco 7304/7206 VXR connected on the two ends. Regardless if traffic shaping is enabled or not o...
Any ideas why it cannot burst on the 7206VXR, but on the 7304, even with same IOS when I enable traffic shaping?I would like to keep it enabled, so the Cisco doesn't even try to send packets at wire speed, and maybe even marks the right packets as DE...
When I remove it, it bursts. So the router is the culprit.So why does it burst with the statement on the 7304 and not on the 7206VXR?CEF is enabled on both routers on the Ethernet as well as Serial ports.
Yes shaping is enabled, but I thought it is still possible to go over CIR as long as there is space on the link, just that it isn't "committed" (but Cisco docs are not consistent here). How else would make a "zero CIR service" make sense.And on the 7...
Actually I cried "solved" to early. Switching to ForeSight solved the problem when transferring data from the 7304 to the 7206VXR, not when transferring from the 7206VXR to the 7304. Here I am limited to EXACTLY CIR. It does not go over CIR setting o...
