Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am upgrading my 3750x stack from IP Base to IP Services in order to enable L3 for EIGRP routing. I am doing this in two stages - image upgrade on one day, configuring EIGRP a week later. My question is when I upgrade my image, will there be any c...
I was wondering if it was possible to create an automated "hold queue" in either UCM or Unity? Specifically, we would like to have a call automatically placed in a queue if no one picks it up in a given amount of time. We would prefer to have some ...
It appears my master switch in my 3750 stack has failed and I am replacing it today. Besides getting the IOS version up to similar code as the rest of the switches, is there anything specific I need to do to replace this unit in the stack? Will Rat...
I am looking to configure LACP on 3750 and wondering if there are any special considerations I should be aware of like minimum IOS level or something like that?Will rate posts.Thanks!
I have (4) separate 3750 switches, (3) are 24 port and a single 48 port. I was thinking of consolidating them into a single stack. I have read some of the white papers so I understand the process, but other than getting the IOS on the same version,...
Thanks Barry. Your suggestion sounds like a good one, I think we'll test that out and see what the feedback is. One quick last question - Do you know of a way to prevent the caller from being played the "ringing" when the call is sent back to the ...
Gotcha. Appreciate your help. Does this plan work?1. Wipe config on new switch.2. Power entire Stack down.3. Connect the new switch via stackwise.4. Power the switches up (with the new one being powered last)OR are you saying this can be done with ...
Great, thanks for your input! So just to be clear there shouldn't be a issue that one of the switches is a 24 port and the others are 48 correct?And lastly, when I create the stack, will the orginal configuration on teh ports remain intact? For exa...
