I have 1242 Configured with 12.4.21a-ja1 and I have many of these. however I have 4 on the same location that have just started rebooting. The crashinfo logs ell me that cmd: PASSWORD statement not printed..Dont know if thats the issue....but some...

I am running the 1242 and bridging between them.....multiple bridges..spanning tree  is working great...someone had put parent commands on the non-root bridges.....my understanding is that this is for Repeater functionality,,I cannot find anywhere in...

I am running 12.2.17a on the Sup72o Base. I have two classic line cards in slots 8 and 9. When I do a show fabric switching-mode on this switch, Module 5(sup720) active,   shows BUS....and Module 6(sup720 Warm) shows crossbar.  Is this telling me tha...

Can I add the PCF card 3bxl to my SUP720 base and have it upgrade and work normally...If so, where does it tell you how to do this?

My question is this  I am using  class basedLLQ and in  particular I have set voice RTP to a priority percent of 70...see attachment for configThe question is, does this set aside the bandwidth for this class so that it is not available to the other ...