Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Have any of you tested the LWAPP 1250 AP with a media converter or combination media converter/PoE injector. - Just wondering if there are any that work OK. I don't need 56 volt PoE since I will only have one radio module installed, but I can't see...
Hello,I am wondering if any of you have tested N adapters with desktop computers and which adapters performed the best.I have tested Broadcom and Intel laptop adapters with favorable results;unfortunately they don't make the same cards for desktop us...
This is the second time I applied an ACS patch to one of our ACS SE 1113 boxes only to have it come up in an unusable state. Today I applied 4.1.4.13.11 from patch level 4.1.4.13.7. I used the GUI to apply the patch. Now most of the services will ...
Has anyone configured their APC UPS network managment cards to authenticate to ACS. The cards support radius, and I have that working, but the user only works as read only. How can I get them to work at at admin level ? I am not sure how to pass t...
I have several ACS 4.0 servers which are authenticating wireless users with PEAP and machine accounts. Everything works fine except that about once every few weeks we have to restart the remote agent on the domain controllers - not at the same time....
Others may disagree, but personally I don't think it is a problem. I used to see this occasionally with wireless devices that are roaming between autonoumous APs. Sometimes a wireless device will roam to an AP on another switch, and you will see th...
I have not tested this in a while so I don't know if Intel fixed it. Where I used to work, I had the same SSID on a and b/g radios. When using the Intel Proset client and the Intel 2915 adapters, the computer would connect to the "a" radio, you cou...
Seth,I bought some 1250 APs to do more or less the same thing. In my case, I want to have N, but only on the 5 GHz radios, and mesh was not going to give me the dedicated bandwidth per AP that I was looking for.Transition networks makes a combinatio...
It is kind of difficult to determine the problem without a lot of digging. One bit of advise. Do not assume the problem is the infrastructure. Test everything - including roaming. I had a similar complaint where I used to work and found the proble...
Dennis,I had to set WMM to "allowed" on the WLAN in WCS to get the higher data rates in addition to using AES. On a side note, I have seen better data rates when disabling laptop wireless card power saving options with some models.Randy
