Looking for the latest & greatest, with functionality including (but not limited to):- packet sniffing- traffic analysis- network utilization- WiFi capability- network diagrams (Visio integration)Etc.. All the good stuff that we should have in order...
OK, I'm not yet very familiar with the product, but I've heard some say that it does well to monitor & manage DEVICES, but don't expect this tool to verify bandwidth or fine tune traffic. A quick blurb from those that know, please chime in.Thanks,Al
Cut-over our previously flat network a year ago and implemented VLANs. We kept the servers in VLAN 98 and the users in VLAN 90 (DHCP scope all setup for WINS/DNS/, ip helper, routing via core, etc..) and everything has been fine for approx. a year n...
We have a T1 circuit that is not ours and must contact our partners in this project to inform them of any failures (we do the monitoring - PING local router's serial interface), at which point people at their end begin troubleshooting. For this, they...
Mahmoood, I already checked all that... everything appears to be fine. I also believe that if such items were a problem (mismatch, etc..), I'd see a lot more people having this issue... especially if inter-vlan routing wasn't working. ;-)Thanks,Al
Yep, I hear ya Jon... I've been telling people that it must be an 'application layer' problem, but I'm just baffled on how changing VLANs could stop the symptoms... anyway, yes we will surely need to sniff this one out, thanks.Al
It went away for the 2 users that were moved to VLAN98 (same VLAN as Exchange servers).But... as I mentioned earlier, there is an ip helper-address command on the core switch's Interface VLAN90 pointing all users to the DHCP server on VLAN98, which ...
Requirement: The T1 circuit is not ours, therefore we must contact our partners in this project to inform them of any failures (we do the monitoring, PING of serial interface), at which point people at their end begin troubleshooting. For this, the...
Thanks Rick, good info... especially the object tracking feature.That is the issue, my core points to a 1721 router which is the first hop towards the p2point T1 link between our offices. If the T1 link dies, the router's ethernet interface is stil...