Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello experts, I am wondering if there is an option to freeze RRM (DCA and TPC timers) on a per RF-tag basis? Could not find it on 17.12 code version neither in GUI nor CLI. I saw this Freeze option only in Configuration > Radio Configurations > RRM ...
Hello colleagues,Please clarify about QoS on 9800:I am using 9800-C-L and in Monitoring -> Clients -> General -> QoS properties I can see:Input Policy Name silverInput Policy State InstalledInput Policy Source AAA PolicyOutput Policy Name silverOutpu...
Hello colleagues,I understood Cisco NDP (Neighbor discovery protocol) for Wi-Fi basic concept, but I cannot realise - how an access point goes off-channel from a station's point of view. Does an AP notify somehow its clients, that they should hold th...
Thank you guys for your replies.Seems that there is no option to do it in one click and it gets to statical assignment of channels/power, and then reverting it back again, which sounds a bit complex.@Mark Elsen , thanks for that doc you've shared, I ...
Thanks, Flavio!Does this mean, that if I use AAA-override, then QoS SSID policy and QoS client Policy are not working? I made a custom QoS policy-map and implemented as QoS client Policy, but in client details output was the same - silver.And silver ...
Hi all,Also two things should be done:1) After created a tag should be activated with the configuration mode command:device(config)#ap filter priority 2 filter-name TAG-FILTER-NAME2) Revalidate the AP tag sources. The AP tag priority become active on...
Here is the exat answer I was looking for: High Channel Utilization and poor SNR in a busier network will lower the opportunities NDP has to transmit. A Voice SSID will defer off channel activity any time there is has been traffic in the voice QOS qu...
