About Tabish Hussain

Tabish Hussain · 03-07-2024

Hi Team,Please help me on how to configure two p2p links failover between Cisco Sw ie. one in HO and Branch office.1. p2p network link one - 173.173.173.1/22 & 173.173.173.5/222. p2p network link two - 174.174.174.1/22 & 174.174.174.5/22

Tabish Hussain · 01-19-2024

Hi Team,I am not able to authenticate one switch C9200 with AD server. All other switches are authenticated and working fine.Below is my config. Please advise.New SW Backup 10.9.22.15 __________________________________________ SERVERROOM#sh run Bui...

Tabish Hussain · 10-29-2023

Hi team, I can access the internet but not able to ping one switch. Other switches are pingable in the network. Below is the configuration of the switch: Building configuration... Current configuration : 16299 bytes!version 15.2no service padservic...

Tabish Hussain · 09-23-2023

Hi Team,I want two LAN to communicate with each other which is connected directly to two ports of FW 5506.FW port 1 - 192.168.1.0/24FW port 2 - 192.168.100.0/24Can someone help with the command to achieve communications between LANs. Thankyou

Tabish Hussain · 09-01-2023

Hi Team,I have SFP-10G-SR Multimode module connected to two switch.(C9500)The issue is when I plug multimode fibre in the module the link doesn't come up.However, when I plug Single mode fibre in Multimode module both side of switch link come up.Any ...

Tabish Hussain · 03-07-2024

Thanks for response.Can you please elaborate the detailed command. It would be very helpful.

Tabish Hussain · 10-30-2023

Yes, other switches has same gateway. Firewall is their but nothing that block it also no acl on DG

Tabish Hussain · 10-30-2023

Yes I can ping default gateway from the switch

Tabish Hussain · 09-23-2023

Hi, I stuck in some strange situation so i can ping from pc(192.168.100.2) to another pc(192.168.1.2) on different n/w but I(192.168.100.2) can not not ping different n/w gateway(192.168.1.1) that is configure on fw int. Please assist.

Tabish Hussain · 09-06-2023

Hi @balaji.bandi I went earlier today at site and changed Tx/Rx polarity which resulted in link being stored.Thanks for revert.

Member Since	‎05-15-2023 04:43 PM
Date Last Visited	‎05-28-2024 01:05 AM
Posts	27
Total Helpful Votes Received	6

User Statistics

User Activity

Two P2P links failover in cisco switch between HO and Branch office

C9200 Switch not able to authenticate with AD Server.

Can access the internet but cannot not ping the switch

Two lan interface communication in firewall 5506

Multi Mode fibre not working

Re: Two P2P links failover in cisco switch between HO and Branch offic

Re: Can access the internet but cannot not ping the switch

Re: Can access the internet but cannot not ping the switch

Re: Two lan interface communication in firewall 5506

Re: Multi Mode fibre not working