Two P2P links failover in cisco switch between HO and Branch office

[Tabish Hussain]

Hi Team,

Please help me on how to configure two p2p links failover between Cisco Sw ie. one in HO and Branch office.

1. p2p network link one - 173.173.173.1/22 & 173.173.173.5/22

2. p2p network link two - 174.174.174.1/22 & 174.174.174.5/22 

[MHM Cisco World]

Config p2p link' and then add static route one with high AD and other with ip sla.

MHM

[Tabish Hussain]

Thanks for response.

Can you please elaborate the detailed command. It would be very helpful.

[liviu.gheorghe]

One small remark regarding the IP addressing of the two P2P links - on these kind of links there are only two hosts talking to each other and for these reason, in order to conserve IP addresses, you would only need a /30 subnet.

An addressing scheme following design best practices would be:

1. p2p network link one - 173.173.173.1/30 & 173.173.173.2/30

2. p2p network link two - 174.174.174.1/30 & 174.174.174.2/30 

Hope it helps.