Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good day!I have 1 DNAC physical appliance deployed in the DC and one in the DR.DC DNAC server is connected to the DC ACI switch, the next hop is DC firewall.DR DNAC server is connected to the DR ACI switch, the next hop is DR firewall.B/W the ACI swi...
I have reviewed the ACL on the Cisco 9606 platform, and it looks a bit different compared to other platforms.I have a question: the service object group(LYNCAUDIOSHARING_PORTS) is placed first in the ACL statement — does it refer to the source or the...
Hello Team,I have a question based on the below logs. We have 2 different ISPs connected to my switch. I have accepted the default route alone from the 2 different ISPs. If I do sh ip ro, I can see there are 2 available paths.. Question: Does it do l...
Hello All,On checking, the ISE device is not reachable. From the switch end logs, it's showing connected but not reachable via ping. Always did shut/unshut to bring up the ISE device. The switch end logs look wired.What is the meaning of "operational...
Hello Team,I have replaced the cable, SFP but still the port going to be err-disabled mode. Please let me know the reason for the error-disabled. The port connected to the Palo Alto Firewall on another side. Model: C9300X-24YLogs:SW#sh int status | ...
