Hi @All ,By using which SNMP OID or MIB file we can monitor the CPU, Memory and other basic metrics of Cisco CBS switches. i have tried using cisco-MIB but no luck, kindly help me out hereThanks in Advance!!
Hi @All Topology as follow,R1 f0/0 - connected to tap0 and R1 f1/0 connected to R2 f1/0 and R1 f2/0 connected to L3 f1/0R2 f0/0 - connected to tap1 and R2 f1/0 Cconnected to f1/1 of L3 and R2 f2/0 connected to R4 f1/0R4 f0/0 - connected to tap2L3 swi...
Hi @All I am trying to monitor Cisco ISE device in a NMS, while SNMPv3 configuration of the ISE device i asked to specify the host(NMS) Engine ID. Does Cisco ISE device does not supports automatically discover the SNMP manager engine ID during the in...
Hi @All I made a demo HSRP lab with the below setup:R1 connected to Switchport E0R2 connected to Switchport E1VPC connected to Switchport E2R1 connected to a tap interface tap1 (192.176.1.1)R2 connected to a tap interface tap2 (168.172.1.1)Conf of R1...
I have created Tap interface in ubuntu machine and associate each tap interface to the device f0/0 interface for internet connection.i can access internet from r1, r2 and r4.
Yes each cloud is a tap interface in the local machine.I am not running ASA and Routers in VMware environment, instead running in a local machine itselfWanted to ping from asa interface and also from ubuntu