Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
What is the easiest way to administer 11 different APs without touching each one individually? ie: Update the access list and push it out to all the APs rather than go to each AP and update it's list? Or modify the config settings of one and export...
I'm having trouble connecting to one of our APs (out of 11 newly installed). I can Ping it, but can't connect via browser, Telnet, or Hyperterm. I don't know anything about these guys (yet) and don't want to wait for a response from the guy who ins...
I've got a 2600 running IOS v. 12.0(3). Friday afternoon it failed on me. When I connect via hyperterminal, the IOS is stuck in a startup loop. It begins the startup and gets into "Decompressing Image" and then starts over: (See Below)~~~~~~~~~~~...
I'm working on a 2509 running IOS 11.2. I was connected via telnet and was configuring a banner message. I started getting the "Password Required but none set" message, which I usually get when I haven't configured the passwords on line vty0. No m...
Is there a way to configure a static routing table with preferred routes?We just installed a wireless wan and are still using the T1 we had in place as a failover link. I want to set my routing table to use the Wireless first, and if necessary to us...
Thanks for your help.The device is Aironet 1200. Current Version of System Firmware: 12.00 Current Version of Web Pages: 12.00 Current Version of Internal Radio Firmware: 5.02.03This info was culled from one of the other APs on the system. ...
Thanks for the input on the Register value. I will definitely check it out.Here is my Sho Run:Current configuration:!version 11.2no service password-encryptionno service udp-small-serversno service tcp-small-servers!hostname SA_Plant_Phone_Rm_10.4.0...
