Configuring Preferential Routes

[mhawthorne]

Is there a way to configure a static routing table with preferred routes?

We just installed a wireless wan and are still using the T1 we had in place as a failover link. I want to set my routing table to use the Wireless first, and if necessary to use the T1 in case the wireless fails. We don't want the T1 to be used unless the wireless fails, regardless of whether it is the best route.

Thanks

[deilert · Accepted solution]

make the admin distance higher on the T1 routes i.e.

ip route x.x.x.x x.x.x.x. next hop ip Admin distance