hi,i need to check if i buy a cisco2901-v/k9 that have voice license i will have telephony-service and can configure all the phones that the hardware permit without any aditional license like dlu for the phones?or i have to buy c2901-cme-srst/k9 that...

Hi, my scenary it cucm7.1 - h323 CUBE gateway - SIP TRUNK i have connected ata 186,the fax fail becouse cisco try to make in passthru but the sip provider SoftX3000 Huawei switch to t38 mode in the invite. and the ATA cannot work with T38 fax relay. ...

i have a gateway srst and the ports are controled by the cucm with mgcp, every work just fine, but when then connection fails, and the router up the srst mode i cant get anything , becouse the commands connection plar under the ports, are not reconiz...

Hi, my scenary it cucm7.1 - h323 CUBE gateway - SIP TRUNKi have connected ata 186,the fax fail becouse cisco try to make in passthru but the sip provider SoftX3000 Huawei switch to t38 mode in the invite.and the ATA cannot work with T38 fax relay. 03...

Problem Details: My scheme:cucmbe 7.1h323 gateway 3825sip trunk providerCUCMBE - H323 - GATEWAY - SIP TRUNKThe incoming calls from sip trunk are routed to a unity callhandlers, the input pressed are not reconized...the user press 1 or 2 or 3.....and ...