Hi All,I have an interesting problem at one of my customers. They are using LMS 4.0.1, but they have a problem with user tracking with SNMPv3. They using a very simple SNMP configuration, wich is the following:access-list 80 permit x.x.x.xsnmp-server...
Hi All,I have the following problem with DFM 3.0.2:One of my customers has got a Cisco 3845 router with some E1 controllers in it. DFM sometimes generates an alert that says the controllers are flapping, meanwhile there is no syslog, or snmp-trap gen...
Hi,I have an issues with DFM email notifications in a newly installed LMS 3.2. The problem is that I can see the alerts appearing on Alerts&Activities, but no email arrives. The used SMTP server is working - another applications able to send email no...
Hello,I have a DFM issue in LMS 3.1. I upgraded from LMS 3.0 2007 Update to LMS3.1, and after a while, DFM started to produce interesting things. It "stops" sending alerts and notifications, and unable to load the alerts and activities page. All the ...
There is some misconfiguration regarding the etherchannel:the speed and duplex settings of all member interfaces has to be identical. You should remove duplex full from Gi0/15. You can check the status of the etherchannel with the command show etherc...
Hi Michel,No, theres is no MAC addresses in the UT report of the problematic switches at all. Btw on the switch itself with sh mac address-table command there are the MACs, but as I wrote in my first post, for some reason the LMS thinks a switchport...
Michel,Thanks for the answer. That was the first problem, wich I already fixed with the customer. As you can see in my post, SNMP context are configured, both 6500 are configured in the same manner, but half of them produces UT data, the other half ...
Hi Joe,I just want to inform you, that there is still some poblem with DFM Notificaiton services. The patch was good, but after a while notification sending stopped. LMS was restarted twice since the last email arrived, and there is no email, but the...
