Hello,I'm connecting to a PIX515 using the Cisco VPN client. The client connects, assigns me an IP address, DNS servers, etc, but I cannot access anything on the internal network.I am initiating the connection from a remote site that is also behind a...

As the subject says, I'm able to get the Cisco VPN to connect to a remote PIX515 but cannot access resources on the remote network.I get a proper IP address from the pool, as well as DNS settings, etc but cannot access anything.Routing at the remote ...

I've got 2 devices on a 3500XL access switch and need to give one of them higher priority than the other. The device in question is sending a steady video stream at about 5.5Mbit/s and I'd like these packets to take priority over the other device whi...

I'm trying to upgrade the OS on a PIX 515. The unit is currently running 4.4(5) and everytime I try to TFTP a new image from monitor> mode I get a checksum failure.Any ideas what could be happening ?Thanks,= K

Hello, We've been using Tandberg video encoders in unicast mode to transmit video streams over IP from encoders in one city to a single decoder in another city. We'd now like to convert the IP stream to multicast so that multiple decoders in various ...