Hi,
A customer is using a pair of 3560-x with C3KX-NM-10G modules. The connection between the two switches are Multimode OM1 and approx 140 meters. 10Gb is running with no problems. SFPs is SFP-10G-LRM.
Now the customer is trying to replace the 3560-...
Hi,
A customer has a subnet, 192.168.0.0 /24. Hosts on that subnet has no default gateway configured, and by some reasons it's impossible to set the default gateway.
There is a router (Cisco 4331) connected to the subnet with ip 192.168.0.1.
Th...
Hello!
Yes, we tried many different cables, including mode-conditioning cables.
We did get a definitive answer from Cisco. The 9200L/9300L is missing EDC (electronic dispersion compensation), which is a pre-requisite for LRM-optics to function.
The s...
Hello,
appreciate your reply.
Unfortunately I'm not able to share the config.
I will also do some more research and add to the thread.
Version is 9.4(2)
and hardware is 5512-x
Hi,
I had the same issue, 2802i, 8.3.102.0.
At first I didn't have a dhcp server on the network. Solved that by using TFTPD64 as dhcp server.
My other problem was, when configuring the Controller IP settings, i entered a non existing default gateway...