CLIENT CONFIGURATION  interface Ethernet0/0 no ip address pppoe enable pppoe-client dial-pool-number 1 interface Dialer1 mtu 1492 ip vrf forwarding INET ip address negotiated encapsulation ppp dialer pool 1 ip route vrf INET 0.0.0.0 0.0.0.0 Dialer...

i have a serial interface that will not come up and it gives me this error msg "Internet protocol processing disabled" it is WIC 2T smart serial back to back connection..the connection is from one 2611xm to another 2611xm router smart serial. i want ...

i have 2621 and all of sudden it will not load the ios. it will continue to boot in a loop with this message below..*** System received a Bus Error exception ***signal= 0xa, code= 0x200, context= 0x80997c98PC = 0x800238e8, Vector = 0x200, SP = 0x809d...

i'm setting up a lab, i want to be able to connect to it from public network. anybody has an idea how to do this ? i have a terminal server..