Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, every one, I spent couple of days trying to make a site-to-site VPN between PIX535 and router 2811 work but come up empty handed, I followed instructions here:http://www.cisco.com/en/US/products/ps9422/products_configuration_example09186a0080b4...
Hi, everyone, Previously I saw a similar thread and posted my troubles with outgoing VPN connections inside that thread:https://supportforums.cisco.com/message/3688980#3688980I did get great help but unfortunatedly my problem is somewhat diff...
Hi, Everyone,I recently bought one Pix 535 from ebay, it comes with software version 7.22 and I upgraded it to 8.0.4, during booting, this message always comes up: "Failed to enable checksum capability", like the following://output copy--------------...
Our enviroment: backbone switch Catalsyt 3560X with Layer 3 inter-Vlan routingRouter: Pix 515E , software version 8.0.4we have L3 vlans using VTP on the switches, inter-vlan working, 2 Vlans are as the following:vlan 1 : 10.1.1.1/255.255.0.0vlan192:...
Thank you everyone for helping me out, I come from Oracle DBA backround so I need and do get lot of helps from experts here.My switch is: catalyst 3560X with 122(53)SE IPBASE.here is some of my Vlan configurations: I don't use ROUTE Port, I configu...
Thank you , thank you, thank you Javier Portuguez, your solution works!!!! you definitely saved me countless hours of headache and hard work, I think today is my luck day to have an expert like you.I 'm a programmer in a small company , for Cisc...
It's been 2 weeks already, I actually made progress on this outgoing VPN thing. Though my solution may not be useful for others, I still post here: the cause is most likely a NAT issue related to COX CIDR address allocation, Here COX told me th...
Thank you Rizwan,we can't have something like 70.169.138.2---70.169.138.16, we are having CIDR address, the outside interface is only one IP , anything else is not ours. The 16 IP addresses assigned to us are in a totally different class from the...
Thank you Rizwan, I deleted all rules you mentioned above but still no luck.Now I think I need change Global Address POOL 10 to type of NAT, when I try to recreate a new POOL, it has 3 choices: Range , Port Address Translation ...
New Info: I actually got some new trace data for outgoing-VPN client dropping problem, the key difference is something called [Interface Pat] is used when the PC has no static NAT, here are the details: (pix inside=10.1/16)#1: when the PC uses dynami...
