Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All,We have recentrly replaced a 1700 router with Cisco 3945 router (Core Router) and the Channalised E1 interface is configured as given below:no network-clock-participate wic 0 !controller E1 0/0/0 framing NO-CRC4 channel-group 0 timeslots 1-...
Hi All,Can I connect Nokia BH-214 Blue-Tooth Headset to Cisco Video Phone 9951.While adding the accessories, it is not able to discover this Blue-Tooth Headset.While searching the Blue-Tooth accesssories will it discover Mobile Phones also?Note: Blue...
Hi All,We are facing an issue while configuring Multicasting on Cisco 7613 Router (IOS - c7600rsp72043-advipservicesk9-mz.122-33.SRE2.bin).Below explains the connectivity details of the same: PC (Multicast Server) --> Cisco 7613 Router--> PC (Mul...
Hi all,Cisco 7609 Router, Enable password unable to reset.Many times CTRL+BREAK Key combination while booting the router does not takes the console to ROMMON.Router boots using the IOS image in the bootdisk0: (For entering into the ROMMON, removed bo...
Dear All,Please share the procedure to delete the full startup-configuration of Cisco ASR 9010 with IOS-XR version 3.9.Tried the following but unable to do it:1. erase nvram2. Commit ReplcePlease let me know any more infomation needed to solve this i...
Hi,Thanks for your quick response...!!! 1. Enabled IGMP Snooping and tried - Same Result 2. IGMP-Group 239.10.10.10 command removed and tried - Same Result 3. VLC TTL made as more than 1 (2, 3 and 4) - Same ResultPlease help to solve the issue.Regar...
Hi,What is your hardware platform?Please try the following commands after removing the standby RP: commit replace commit replace best-effort Do not forget to create a user before reloading the router as given below:RP/0/RSP0/CPU0:io...
Hi,This issue is resolved by pressing the ESC key while booting, which will takes you to RP mode. (Removed one RP) Router-sp>Router-sp>enableRouter-sp# erase nvramRouter-sp#reloadThe solution may help you in the future!! Thanks and RegardsAkhil
Hi,By default Cisco 3750 Switch support upto 20 numbers of PVLANs Domain only.Please goes through the link for further details.http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_25_see/configuration/guide/swpvlan.htmlRega...
