Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm implementing stateful NAT (SNAT) & have a query regarding how you create with multiple standby SNAT groups on an interface.Going through the options it appears that once the group names have been assigned these then have to be grouped under the s...
I have a scenario where customers have dedicated connections/infrastructure into a hosted environment at 2 x Data Centres (1 x primary, 1 x backup) with shared bandwidth between Data Centres. I wish to limit/restrict the amount of bandwidth between d...
Is it possible to configure ISDN backup for an IPSEC L2L tunnel between 2 routers.IPSEC L2L connection from remote site to HO. Need to provide a backup solution for if the remote sites ADSL connection goes down. Cannot do normal DDR as cannot run dyn...
Problem: IPSEC tunnel configured as pre-share/des/md5 between PIX Firewall(s) & VPN 3030 Concentrator intermittently hang. When this occurs the PIX is showing the SA as still being active (show crypto ipsec sa) whereas the 3030 doesn't. Only solution...
I wish to upgrade a PIX501 from 6.2 to 6.3 to enable remote management (SSH etc) via IPSEC VPN.The problem I've encountered is that the PIX 501 won't seem to communicate to/from a TFTP server on the inside network.I've tried:wr netcopy tftp flashtftp...
You should be able to achieve what you want by first configuring ISDN backup of the leased line using the backup interface command & then using backup load command to set a percentage load for the ISDN line to come up.See here for ISDN backup details...
Jing,Each client has 2 x leased line connections (1 into each of 2 data centres). The Data centre's have ATM - ds3 connections between them. Each datacentre houses a hosted environment for each client which is housed on a dedicated Lan per client. Th...
The error message is just a TFTP timeout.There is nothing seen on the TFTP server logs.Using sniffer on my laptop + TFTP server I'm seeing a tftp request (UDP 69) from the PIX ethernet1 to the TFTP server but no response. The TFTP server (Cisco or Pu...
