I'm implementing stateful NAT (SNAT) & have a query regarding how you create with multiple standby SNAT groups on an interface.Going through the options it appears that once the group names have been assigned these then have to be grouped under the s...

I have a scenario where customers have dedicated connections/infrastructure into a hosted environment at 2 x Data Centres (1 x primary, 1 x backup) with shared bandwidth between Data Centres. I wish to limit/restrict the amount of bandwidth between d...

Is it possible to configure ISDN backup for an IPSEC L2L tunnel between 2 routers.IPSEC L2L connection from remote site to HO. Need to provide a backup solution for if the remote sites ADSL connection goes down. Cannot do normal DDR as cannot run dyn...

Problem: IPSEC tunnel configured as pre-share/des/md5 between PIX Firewall(s) & VPN 3030 Concentrator intermittently hang. When this occurs the PIX is showing the SA as still being active (show crypto ipsec sa) whereas the 3030 doesn't. Only solution...

I wish to upgrade a PIX501 from 6.2 to 6.3 to enable remote management (SSH etc) via IPSEC VPN.The problem I've encountered is that the PIX 501 won't seem to communicate to/from a TFTP server on the inside network.I've tried:wr netcopy tftp flashtftp...