Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a stackwise pair of C9500-48Y4C switches. They are correctly registered to CSSM.The sofware is 16.12.4, network-advantage license appear to by active, but for unknown reason I cannot configure MKA policy in global config mode. SWITCH(config)#...
Customer want to make fast reload upgrade on stack of c9300-48UXM switches. Current version is 16.12.02, new version is 16.12.04. This is quite small upgrade. I have not found there is some ROMMON or FPGA microcode upgrade needed, but still this fast...
I have issue with Cat9k smart license.
The switches was successfully registered to CSSM.
After reload the license information dissapeared and the switches run again in evaluation mode.
Smart Licensing Status
======================
Smart Licensi...
We use SNMP to get entries from DHCP snooping database on Cat3800 switches with IOS 03.06.06.cdsBindingsEntry OID 1.3.6.1.4.1.9.9.380.1.4.1.1
I upgraded switch to latest Denali (cat3k_caa-universalk9.16.03.06.SPA.bin) and thisOID is unreachable now. ...
Hello,
I have an issue with router 4321.
I set the "boot system" variable to load specific file on boot:
Router#sh bootvar
BOOT variable = bootflash:/isr4300-universalk9.03.16.06b.S.155-3.S6b-ext.SPA.bin,12;
CONFIG_FILE variable does not exist
BO...
I don't get it. My SampleT timestamp shows 5785795840. It's about 6.82 days.
But the device uptime is 9 weeks, 3 days, 23 hours, 20 minutes. So how to translate the timestamp into some meaningful time?
Hi Scott,thank you very much for the clarification. I was confused by this "stacking" note in configuration guide.The fast software upgrade feature is supported on both stacking and standalone systems.https://www.cisco.com/c/en/us/td/docs/switches/la...
Changing the configuration register does not fix that.
I made some tests and found out that this is ROMMON dependent behavior.
For System Bootstrap, Version 16.2(2r) that comes with "clock issue fixed" routers 4321
the ROMMON tries to boot the s...
I guess the number 12 in the bootvar parameter is number of retries before it proceed to search for another image.
Router#sh bootvar
BOOT variable = bootflash:/isr4300-universalk9.03.16.06b.S.155-3.S6b-ext.SPA.bin,12;
CONFIG_FILE variable does not ...
