Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Cisco 1120 running FDM version 6.6.1-91. Console (cable) CLI credentials use RADIUS, just like all other authentication methods to the FDM.We're getting ready to upgrade our FDM. We want to be able to log into the console (using serial console cable...
I am creating PowerShell script for API on Firepower 1120 (NO FCM, just a standalone chassis managed with FDM). I have tested the API itself using the FDM "API Explorer" as follows (obviously account names and passwords are not real): {"grant_type": ...
We have the following hardware:Model Cisco Firepower 1120 Threat Defense Software 6.6.1-91 VDB341.0 Intrusion Rule UpdateI have a general questions about how things are labeled with Firepower.FDM=Firewall Device Manager. Since we have a hardware Fire...
At my organization, we are not admins on our own machines, and we usually can't install software. So I've been running Cisco Active Advisor Desktop Scanner from one of our monitoring servers. Keep in mind, this is NOT the version that you run fro...
This post by Janaka above: boot system flash:isr4300-universalk9.03.13.08.S.154-3.S8-ext.SPA.bin <--and remove boot system flash bootflash:isr4300-universalk9.03.13.08.S.154-3.S8-ext.SPA.bin ...was the solution for me. I had a continual boot loop b...
Thank you. I found out by working with TAC this morning that the file that contains the initial web-interface password is in a document that is NOT included on the Software Download page for SSM at: https://software.cisco.com/download/home/28628550...
That is the solution, Georg. Based on this information we changed the concept of what we were doing from a route-map to a different method altogether. It's a bit frustrating that the 6500 platform accepts the route-map vrf next hop command but it d...
Thanks Burt! Like I said, Vlan305 was my second choice. It didn't work on the actual inbound interfaces (pair, not etherchannel) either. Same results on those. Do you have any commands you'd like me to run to show you more information from the sw...
