Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Have anybody seen GLBP on 6509 LAN router keep failling over back and forward? Below is the sample from router log.Jan 23 04:56:09 UTC: %GLBP-6-STATECHANGE: GigabitEthernet4/8 Grp 7 state Standby -> ActiveJan 23 04:56:09 UTC: %GLBP-6-FWDSTATECHANGE: ...
Is there any explanation why IOS has this large round trip delay? Any URL explain this will be appreciated.round-trip min/avg/max = 1/2/4 msExample:Router#ping 10.1.1.1Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 10.1.1.1, timeout ...
What is the IOS PING command for a DOS style below? P:\>ping 10.1.1.1Pinging 10.1.1.1 with 32 bytes of data:Reply from 10.1.1.1: bytes=32 time<1ms TTL=253Reply from 10.1.1.1: bytes=32 time<1ms TTL=253Reply from 10.1.1.1: bytes=32 time<1ms TTL=253Repl...
I heard from somebody saying IPT is not really a cost saving technology compare with traditional PBX. Therefore IPT is dead? Is this something true or just rumours?
Hi, does anybody have a sample network diagram doing L2 scretch across two Data Centers? Uptime has to be 99.9999%. Also is that possible to achive this without using STP?
Well, Found the answer. Below is the example.Router#pingProtocol [ip]:Target IP address: 10.1.1.1Repeat count [5]: 100Datagram size [100]:Timeout in seconds [2]:Extended commands [n]: ySource address or interface: Serial0/0Type of service [0]: 2Set D...
