About bansal.ojasvi

Network for 600 users · 09-17-2009

I am currently managing a network for 600 users. I am using a 3750G-12S-E as the WAN switch/router. I have 13 X 2960 connected with the main switch in a ring topology using Fibre cable. I have a total of 10 meg of internet bandwidth. There are busine...

bansal.ojasvi · 07-14-2009

Hello Experts,I have an issue setting up site to site VPN between Cisco 2651XM and ASA505.Here's the config from both the devices. On Cisco 2651XM===============crypto isakmp policy 1 encr 3des authentication pre-share group 2crypto isakmp key cisco1...

bansal.ojasvi · 05-25-2009

I am working on WS-C3750G-12S and WS-C3750G-12S. 2960 has an IP phone connected to its fa 0/48 interface. So I did Int fa 0/48mls qos trust dscp Then I created a class-map class-map VOIP_RTP match ip dscp 46class-map VOIP_SIGNALING match ip dscp 26Th...

bansal.ojasvi · 03-09-2009

Hello Experts,I use 2651XM as gateway. We have a sister concern. It also uses 2651XM as gateway. I have created a GRE tunnel between our office (Branch A) and the sister concern (Branch B). users VPN to Branch A. Recently a user asked me if he could ...

bansal.ojasvi · 02-27-2009

What is the difference between manual and NVRAM method in VLAN?Vlan130 x.x.x.x YES NVRAM up upVlan192 x.x.x.x YES manual up upVlan500 x.x.x.x YES NVRAM up upOut of 27 vlans that I have, only one (vlan192) says manual.OJ

Re: Network for 600 users · 09-21-2009

Wow...I can't thank you enough but THANK YOU. You are awesome.One more question. While I have been sleeping on this issue, another idea came to my mind. Since my access switches are on different port on the main 3750, why don't I run routing between ...

Re: Network for 600 users · 09-20-2009

Ingress, egress and timed based. c2800nm-advipservicesk9-mz.124-15.T1.binNo hosts talk to other hosts in different vlan. The only traffic that goes out or comes in is the internet. ThanksOJ

Re: Network for 600 users · 09-20-2009

Thanks for your response.Do you have an example of a similar config that would go on to 2811?I am not sure, if I understood "BTW, because .......switch links". Could you please explain a bit.Much appreciatedOJ

Re: Network for 600 users · 09-20-2009

Yes this is a gig fiber. I have a spare Cisco 2811 (does it have resources to support 600 users?). What you are saying is, use a HWIC-1GE-SFP on the router and use it in front of the 3750 Switch. I have 13 VLANs configured on 3750 and it acts as a DH...

Re: Network for 600 users · 09-18-2009

Yes, 2 and 5 meg is part of 10 meg bandwidth. The other 3 meg will be used by home users during day time.What kind of router do you suggest? We use fiber cables.I don't have any control on the ingress queue. However, I can ask my ISP if they could do...

Member Since	‎12-30-2008 09:16 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	41
Total Helpful Votes Received	5

User Statistics

User Activity

Network for 600 users

Site to Site VPN using Cisco 2651XM and ASA5505

QoS for Voice and Data

Routing (possibly VPN) confusion

Difference between Manual and NVRAM

Re: Network for 600 users

Re: Network for 600 users

Re: Network for 600 users

Re: Network for 600 users

Re: Network for 600 users