For an IP conversation that is passed through 2 routers....and packets are captured at the output of each router at the ports the IP conversation is routed to.....would each side of the router packet capture carry the same packets or conversation pac...

Does RSVP determine what incremental delay to specify for each router so a total end to end delay is not exceeded? Or as an example, if the RSVP protocol determined there are 5 routers in a path and its end to end (Sender to Receiver) delay requireme...

I cant seem to view a Syslog with a Device Mgr. I have one router connected to a PC with Device Mgr software installed. I think I set all the enables for Syslog. I set the IP address for the syslog to report to the PC that Device Mgr is installed...

How can I ping point to point, or ethernet to ethernet when there is no IP address assigned? Is that possible? I tried using a MAC address with Ping but that did not work. In this case its a PC to a ethernet to 100BaseF (fiber) conversion and I w...

I am measuring re-convergence times between LAN routers of between 1-5 seconds. Can the router settings be tweeked to improve that time?Configuration is:2 routers in cluster configuration on west side (R1, R2) to provide redundant links.1 router on ...